Table of Contents
Ideas and Open Quistions
This page is where we are putting ideas and questions for user feedback. Email firstname.lastname@example.org if you have an opinion.
Pull Up/Down Resistor on Output
Should the Drive Kards have pull up/down resistors (on the output) so that the other voltage is available when the transistor is shut off (instead of open circuit) on the Sink/Source? Some down sides of doing this is that power will be dissipated through the added resistor when the transistor is on and lowering output current available to load…
ideas_and_open_questions.txt · Last modified: 2019/08/17 15:04 by 127.0.0.1