|Clock Speed||80 MHz|
|Operating Voltage||24 VDC|
|Input Voltage (limits)||8-30 VDC|
|Digital I/O Pins||24 (2×12 pin rails)|
|Max DC Current per I/O Pin||2A (6A max per rail)|
|Flash Memory||512 KB (+12 KB for Bootloader)|
|Data Ram||128 KB|
- Four Hardware UART(S)
- A USB Host or Device Controller
- 10-bit ADC Channels
- 8 DMA Channels
- Timer Hardware
- SMSC Ethernet Physical Layer
- Secondary 32kHz Clock Crystal
This allows for easy utilization of the PIC32 Real Time Clock Module
The Quick240 is designed to operate between 8VDC to 30VDC nominal 24VDC.
- High voltage in - 5VDC 1.5A Output DC-DC Converter
This is accomplished with a dual power supply circuit that starts with a high efficiency DC-DC converter that outputs 5VDC with up to 1.5A of output current.
- 3.3VDC 800mA Linear Regulator
The 5VDC power supply in turn drives a linear +3.3VDC 800mA supply. These power supplies with a largess of excess current mean that custom boards with hearty power requirements can be implemented with ease.
features.txt · Last modified: 2019/08/17 15:04 by 127.0.0.1