User Tools

Site Tools


qki-bo100

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
qki-bo100 [2015/04/01 20:09]
mike [Example]
qki-bo100 [2015/06/17 11:31] (current)
jacob [USER INSTRUCTIONS]
Line 21: Line 21:
  
 The Quick240 contains 6 card slots which are numbered from 0 to 5). Each of these Kard slots has connections to different voltages and ground. Additionally each Kard slot has connections to 4 of the GPIOs located on the screw terminal strip (each of which is numbered 0 to 3). You will notice on the terminal strip, that each of these The Quick240 contains 6 card slots which are numbered from 0 to 5). Each of these Kard slots has connections to different voltages and ground. Additionally each Kard slot has connections to 4 of the GPIOs located on the screw terminal strip (each of which is numbered 0 to 3). You will notice on the terminal strip, that each of these
-positions are labeled in the format CxPy (e.g. C0P1, C2P3 etc.) The number after the C specifies the card slot (0 to 5), while the number after the P specifies the port number (0 to 3). For example, '​C0P1'​ specifies Kard Slot 0, Port 0 and '​C3P2'​ specifies Kard Slot 3, Port 2.+positions are labeled in the format CxPy (e.g. C0P1, C2P3 etc.) The number after the C specifies the card slot (0 to 5), while the number after the P specifies the port number (0 to 3). For example, '​C0P1'​ specifies Kard Slot 0, Port 0 and '​C3P2'​ specifies Kard Slot 3, Port 2. ***NOTE the reason the slots pins are labled CxPy instead of KxPy is because we could resist having a C3P0 written on the silkscreen.
  
 The BO-100 Kard controls how the connection is made between the different signals on an individual Kard slot, and each of the 4 terminal strip positions assigned to that Kard Slot. There are many options on how you can connect a terminal strip position. For example, you may assign a terminal strip position to: The BO-100 Kard controls how the connection is made between the different signals on an individual Kard slot, and each of the 4 terminal strip positions assigned to that Kard Slot. There are many options on how you can connect a terminal strip position. For example, you may assign a terminal strip position to:
qki-bo100.txt ยท Last modified: 2015/06/17 11:31 by jacob