|Microcontroller	|PIC32MX795F512L|
|Clock Speed	|80 MHz|
|Architecture	|32-Bit|
|Operating Voltage	|24 VDC|
|Input Voltage (limits)	|8-30 VDC|
|Digital I/O Pins	|24 (2x12 pin rails)|
|Max DC Current per I/O Pin	|2A (6A max per rail)|
|Flash Memory	|512 KB (+12 KB for Bootloader)|
|Data Ram	|128 KB|
|Ethernet	|10/100|


  * Four Hardware UART(S)
  * A USB Host or Device Controller
  * 10-bit ADC Channels
  * 8 DMA Channels
  * Timer Hardware
  * SMSC Ethernet Physical Layer
  * Secondary 32kHz Clock Crystal \\ This allows for easy utilization of the PIC32 Real Time Clock Module

==== Power ====
The Quick240 is designed to operate between 8VDC to 30VDC nominal 24VDC.
  * High voltage in - 5VDC 1.5A Output DC-DC Converter
This is accomplished with a dual power supply circuit that starts with a high efficiency DC-DC converter that outputs 5VDC with up to 1.5A of output current.
  * 3.3VDC 800mA Linear Regulator
The 5VDC power supply in turn drives a linear +3.3VDC 800mA supply.  These power supplies with a largess of excess current mean that custom boards with hearty power requirements can be implemented with ease.